How to install Interactive LED floors?

Nowadays, the LED stage rental screen is widely used in the stage interpretation, has become a more booming boosting agent in the entertainment industry. It can not only create a creative, technology, but also create a beautiful stage visual feast for the audience. In particular, the joining of today's creative LED display, LED interactive brick screen, so that the LED stage rental screen is more dazzling, more attractive! Today we will focus on the installation of the interactive LED floor.

 

Here is the content list:

l Interactive LED floor installation method

l Cleaning method of interactive LED floor

 

Interactive LED floor installation method

1.Fixed and installed the mounting brick screen needs to dig the floor, after fixing the bracket, then install the brick screen, the disadvantage is that it is not movable and maintained directly, the unpacking body of our company directly is disassembled.

2, Track mounting LED floor tile screen can be placed directly in the track, and can be disassembled at any time to facilitate maintenance.

3, Install the shortcut track and the ground using the screw connection, the rails and rails are connected between the rails, and the casing and the cabinet are connected to the casing, and the casing around the LED floor is used by the cover, these connectors It can be disassembled.

4, Mobile convenient use of the air box package, easy to move anytime, anywhere, to prevent acrylic plate glass, glass and cabinet from the box, convenient maintenance and disassembly in the case of the LED floor tile screen. Moreover, acrylic glass has the advantages of wear resistance, not easy to scratch.

 

Cleaning method of interactive LED floor

1. Dust removal: that is, blowing dust. Dust blowing should be in the same direction, from left to right or from right to left. Use a professional electric brush to clean the dust or dirt on the surface of the display module. When cleaning, the pneumatic brush can be cleaned evenly, and it can be cleaned repeatedly according to the pollution degree and age or aging of the display screen.

2. Cleaning: use the sprayer to spray the special cleaning liquid to the surface of the module for preliminary cleaning.

3. Secondary dust removal: use a professional electric brush to clean the dust of the full-color LED display module again. Note: the brush needs to be replaced for this cleaning. Brushes can be reused but must be cleaned to avoid re-contamination.

4. Secondary cleaning: spray the special cleaning liquid to the surface of the module for re-cleaning to remove the dust left by the secondary dedusting. According to the residual dirt on the surface of the display screen, the ratio of cleaning fluid to water can be determined. If there is not much dirt, clean water can be used to spray. Keep the direction from top to bottom or from right to left. 5. Blow-drying: it can be air-dried naturally under no special circumstances, such as high humidity, low temperature and so on.

6. Repair: use the sprayer to spray the special repair liquid horizontally and evenly to the surface of the display screen for surface repair.

7. Air drying: it can be dried naturally under suitable conditions such as temperature, humidity, wind speed and so on. In the case of low temperature and high humidity, air gun can be used to dry and require the air pressure to be less than 3 kg.

 

The interactive LED floor tile screen belongs to an application branch of the LED display field. Through innovative design, this product is widely used in stage display, commercial applications, store decoration and other directions. The emergence of interactive floor tile screens provides a more novel means of expression for a variety of performance creative design, and is a useful supplement to the current display equipment.