How to put the Interactive floor screen?

The LED interactive brick screen is different from traditional interactive projections. It does not require other media, and users can use physical operations such as hand or feet to interact with virtual scenes on the projection area. Therefore, the interactive brick screen has high novelty and ornamental, which can be active atmosphere, increase the scientific and technological content of the exhibition, activity on the event, and improve the scene of the exhibition and activities. Today we will focus on the usage of the Interactive floor screen.

 

Here is the content list:

l Interactive LED floor installation method

l Cleaning method of Interactive floor screen

 

Interactive LED floor installation method

1. Fixed installation

Fixed installation needs to be dug up. After fixing the bracket, the floor tile screen is installed. The disadvantage is that it can not be moved, and the unpacking handle of our company can be removed directly upward during maintenance.

2. Track installation

LED floor tile screens can be placed directly in the track, and can be disassembled at any time to facilitate maintenance.

3. Quick installation

The track and the ground are connected by a screw, the guide rail and the guide rail are connected by connectors, the box body and the box body are connected by positioning columns, and the box body around the LED floor brick screen is surrounded by a perimeter. These connectors can be removed.

4. Easy to move

Using the air box package, it is convenient to move anytime, anywhere, and the acrylic plate glass is prevented from the case of the LED floor tile screen, and the glass is separated from the cabinet, which is convenient for maintenance and disassembly. Moreover, acrylic glass has the advantages of wear resistance, not easy to scratch.

 

Cleaning method of Interactive floor screen

1. Dust removal: that is, blowing dust. Dust blowing should be in the same direction, from left to right or from right to left. Use a professional electric brush to clean the dust or dirt on the surface of the display module. When cleaning, the pneumatic brush can be cleaned evenly, and it can be cleaned repeatedly according to the pollution degree and age or aging of the display screen.

2. Cleaning: use the sprayer to spray the special cleaning liquid to the surface of the module for preliminary cleaning.

3. Secondary dust removal: use a professional electric brush to clean the dust of the full-color LED display module again. Note: the brush needs to be replaced for this cleaning. Brushes can be reused but must be cleaned to avoid re-contamination.

4. Secondary cleaning: spray the special cleaning liquid to the surface of the module for re-cleaning to remove the dust left by the secondary dedusting. According to the residual dirt on the surface of the Interactive floor screen, the ratio of cleaning fluid to water can be determined. If there is not much dirt, clean water can be used to spray. Keep the direction from top to bottom or from right to left. 5. Blow-drying: it can be air-dried naturally under no special circumstances, such as high humidity, low temperature and so on.

6. Repair: use the sprayer to spray the special repair liquid horizontally and evenly to the surface of the display screen for surface repair.

7. Air drying: it can be dried naturally under suitable conditions such as temperature, humidity, wind speed and so on. In the case of low temperature and high humidity, air gun can be used to dry and require the air pressure to be less than 3 kg.

 

Recently, full-color high-definition and high-refresh LED display screen has become a new growth point of LED display industry, which contains a huge market. At present, the technical level of interactive LED floor tile display HD high-brush industry has achieved excellent performance.

Harbor Visual team also has these products, welcome to buy them. Company website: https://www.interactiveledfloor.com/