Wet weather These outdoor LED floors must be understood in seconds

For LED display outdoor LED floor during use

1. Check the lines and switches to keep them dry so as to avoid electric leakage and electric shock.

2. Moderate ventilation can help the moisture attached to the display evaporate quickly and reduce the relative humidity of the indoor environment. However, avoid ventilating in some windless and humid weather, which will increase indoor humidity.

3. Air conditioning can be used to dehumidify and place desiccants and physical hygroscopicity to keep the display dry and prevent the display from getting wet.

4. Lease-type indoor LED display outdoor LED floor for outdoor use. In case of rainy weather, the power must be cut off immediately. Before the screen can be removed, cover it quickly with a pre-prepared rain-proof cloth and leave the box to dry on sunny days. If it is raining continuously, open the back cover of the box and dry it with a fan. Then air in a ventilated and dry room for more than 8 hours. Turn down the brightness to ensure that it lights up for more than four hours to fully emit moisture from the electronic components.

5. The outdoor LED floor LED screen display is used at least once a week during the rainy season, and the screen is turned on at least once a month for more than 2 hours.

6. The outdoor display is used in a complex environment, which will inevitably cause water seepage in the box. In addition to the above measures, it is usually necessary to check regularly whether the waterproof rubber ring of the box is aged, deformed or damaged. Is the screw or lock of the sealed box easy to loosen and not sufficiently pressurized?

7. Long-term shelved outdoor LED floor screens should be frequently powered on for maintenance and debugging, whether indoor LED display or outdoor LED display, if not used for a long time, there is a high probability that dead lights and blind spots will appear when enabled again. If you have the correct maintenance knowledge, you can completely avoid such problems.

Correct remedy for damp LED display outdoor LED floor screen:

1. Use a fan or other tools at the fastest speed to dry the damp LED display completely.

2. Aging the screen after fully drying by electric current as follows:

A. Adjust the brightness (full white) to 10% and power aging 8-12 hours.

B. Adjust the brightness (full white) to 30% and power aging for 12 hours.

C. Set the brightness (full white) to 60% and power aging 12-24 hours.

D. Adjust the brightness (full white) to 80% and power aging for 12-24 hours.

E. Adjust the brightness (full white) to 100% and power aging 8-12 hours.

Stored LED display outdoor LED floor

1. Keep the air tank and packing box dry. Place desiccants and dehumidifying media in the air tank. When entering the water vapour bag, dry it in time and do not touch the water.

2. Screen storage warehouses must be dry, elevated and preferably placed with industrial dehumidifiers.

3. After wet weather, the stored LED display outdoor LED floor lights up for detection and, if necessary, asks the manufacturer for technical support.

Finally damp-proof summary

1. Select high-quality LED display outdoor LED floor produced by high-quality manufacturers;

2. Check and maintain regularly to avoid accidents and increase service life;

3. Technicians should develop good usage habits and learn scientific usage methods.