What are the errors of LED dance floors?

LED dance floors are important areas to have fun and communication where the safety is the key issue. The maintenance of LED dance floors can not only protect the safety, but also reduce the cost. Before maintaining LED dance floors, we should first know the problems LED dance floors have.

• What are the errors of LED dance floors?

• Do LED dance floors need to fix?

• What should be noticed for LED dance floors?

  
  

What are the errors of LED dance floors?

The whole LED dance floors are not bright. The power supply should connect with the signal. Whether the test card can identify the interface, otherwise the red light flashes. Whether it is connected with the power supply and ground of the test card. Detect whether LED dance floors have faulty welding or short circuit. Whether the corresponding enable signal input and output pin has faulty welding or short circuit to other lines.

During oblique scanning, the regular interlaced lines are not lit and the LED dance floors overlap. Whether there is broken wire, faulty welding or short circuit between signal input ports. Check whether there is open circuit, faulty welding or short circuit between output terminals. Detect whether there is a short circuit between signals or whether a signal is short circuited to ground.

When LED dance floors are fully on, one or several lines are not on. Detect whether the lines are open circuit, faulty welding or short circuit.

Do LED dance floors need to fix?

The LED dance floors shall be kept dry. The objects, such as water, iron powder and other conductive metals, are prohibited. Powering on the large LED dance floors containing humidity will lead to corrosion of parts and components, resulting in permanent damage. Rainproof measures shall be taken.

We can choose passive protection and active protection, try to keep the items that may cause damage to the LED dance floors away. Wipe the screen gently as much as possible when cleaning.

It is also very necessary to do a good job of cleaning and maintenance for LED dance floors. Exposed to the outdoor environment for a long time, wind, sun and dust are easy to be dirt. The dust needs to be cleaned in time with dust-proof soil to avoid affecting the viewing effect.

What should be noticed for LED dance floors?

It is required that the power supply of LED dance floors shall be stable and well grounded. It shall not be used in bad natural conditions, especially in strong lightning weather.

When playing, do not stay in all white, red, green, blue and other full bright pictures for a long time, so as not to cause excessive current, excessive heating of power line, damage of LEDs and affect the service life of LED dance floors. Do not disassemble or splice the screen at will.

Regularly check whether the LED dance floors work normally and whether the line is damaged. Replace or repair the damaged line in time to maintain the normal operation of the large screen.

Learn more something about LED dance floors can know the errors of LED dance floors and the fix of LED dance floors. Shenzhen HARBOR VISUAL CO., LTDis likely to offer you some advices about your designs. If you have any questions, please contact us.