LED display interactive LED floor how safe in the storm?

We began to worry that our LED display interactive LED floor was exposed to sunlight and rain. Baptized in the next rain, are you okay? Whether it can survive? The indoor and outdoor display screens have waterproof and moisture-proof LED display screens and interactive led floors. If the waterproof and moisture-proof work is not in place, it is easy to cause short circuit of the display screen, and in serious cases, it may also cause fire, etc. Therefore, in this season when the rainstorm is faster than turning the book, waterproof and moisture-proof is an essential work of LED display screen.

How to prevent moisture and water of LED display?

For the indoor display screen, it is necessary to have proper ventilation first. Moderate ventilation can help the water vapor attached to the display evaporate rapidly and reduce the relative humidity of the indoor environment. However, in some windless and humid weather, avoid ventilation, which will aggravate indoor humidity; Second, place desiccant indoors to reduce moisture in the air through physical moisture absorption; Or turn on the air conditioner for dehumidification. If the air conditioner is installed in the space where the display screen is installed, the air conditioner can be turned on for dehumidification in wet weather.

The environment of outdoor LED display is more complex than that of indoor. Indoor methods can be used to prevent moisture. However, indoor and outdoor screens should not only consider humidity, but also do a good job in daily maintenance such as waterproof, especially in rainy season. Therefore, good sealing installation can help the display reduce the risk of water ingress, regularly clean the dust attached inside and outside the display, and also help the display better heat dissipation and reduce the adhesion of water vapor

At the same time, in the later process, due to excessive humidity, PCB board, power supply, power line of LED display screen and other components are more likely to be oxidized and corroded, resulting in failure. Therefore, when making LED display screen, we need to do a good job in the anti-corrosion treatment of PCB board, such as coating the surface with three layers of yellow paint. High quality accessories shall be selected for power supply and power cord. The welding place is the most easily corroded place, so we should pay attention to protection, especially the frame is easy to rust, so it's best to do a good job of rust prevention

Finally, whether indoors or outdoors, the most effective way to avoid moisture damaging the display function is to use it often. The working display itself will generate some heat and evaporate some water vapor, which greatly reduces the possibility of short circuit due to humidity. Therefore, the humidity effect of frequently used displays is much smaller than that of infrequently used displays.